Motorcycle Triumph RADIAL MASTER CYLINDER 19mm DUAL DISC BRAKES 600cc & above

Made in the UK By Hel Performance. Please note, NOT suitable for some ABS model motorcycles Note below info. Bikes with a 2 pin Micro-switch connection can be. Used as long a’2 wire’ Brake Light Banjo bolt is used and correctly wired. Bikes with the ABS system removed and correctly by-passed can also be used. Use a HEL Master Cylinder if your bike supports a 3 pin micro switch on the OEM Lever. Motorcycle Front Master cylinder with lever – 19mm. 19mm body, a well-engineered master cylinder upgrade for most twin brake disc motorcycles. The well-designed lever that comes with the Master cylinder has three ratios available from one lever. Plugs are inserted in the pill shaped hole. With the 19mm master cylinder you can obtain an 18/19, 19/19 and a 20/19 from one lever and two inserts. This is done by turning the plugs 180 degrees which gives a +1 ratio, if you use the plug with a central hole, you obtain a 1:1 ratio. Machined and hand built in the UK Master cylinder. A black brake lever is included for FREE. Please check compatibility before purchasing and always ask if you are unsure. Thank you for viewing this add, we are always happy to help and help when needed. (advertised on our other ads) This master cylinder upgrade is for single and smaller CC models. This lever ratio gives more feel and travel on a twin caliper system, mostly for the larger CC models. Generally a good all-rounder, gives a average lever travel but gives you a harder feel. If you want a hard feel on the lever then this is the ratio you would look at setting but will give less lever travel. For the bigger CC models.